masterjedi73
Sep 17, 06:03 PM
As I said before...
PowerMac G5 = DIMMs in PAIRS
4 DIMM or 8 DIMMs do not matter, all PowerMac G5s use memory in pairs -- due to dual channel memory.
Single channel is 1 DIMM installed at a time, the PowerMac G5 is NOT one of these machines. Therefore install 2 at a time.
OK. thanks. I was at the apple store today and i told the salesperson that i wanted 1 gig of ram. he offered me a 1 gb stick, or two 512s. That's why i was confused. I told him that i thought they needed to be in pairs, and he said no.
thanks.
PowerMac G5 = DIMMs in PAIRS
4 DIMM or 8 DIMMs do not matter, all PowerMac G5s use memory in pairs -- due to dual channel memory.
Single channel is 1 DIMM installed at a time, the PowerMac G5 is NOT one of these machines. Therefore install 2 at a time.
OK. thanks. I was at the apple store today and i told the salesperson that i wanted 1 gig of ram. he offered me a 1 gb stick, or two 512s. That's why i was confused. I told him that i thought they needed to be in pairs, and he said no.
thanks.
TheOnlyJon
Sep 24, 02:55 PM
It's like Speed: 2. Props to the rail system for averting disaster though.
nicname
Apr 15, 06:17 AM
Speck SeeThru Satin is made out of 2 materials (TPE and PC) and Incase snap is a PC case.
PC=hard plastic.
is TPE that rubber found around bumper cases?
PC=hard plastic.
is TPE that rubber found around bumper cases?
Cromulent
Dec 28, 06:25 AM
How do I give out these invites... I know people who would appreciate it....
I'm a premium subscriber so I am not sure if it works the same way for free account holders but when I open the client a little bar drops down at the top saying share Spotify with your friends or something similar. Click the link and it takes you to the relevant page.
I'm a premium subscriber so I am not sure if it works the same way for free account holders but when I open the client a little bar drops down at the top saying share Spotify with your friends or something similar. Click the link and it takes you to the relevant page.
more...
Benjamin
Nov 22, 02:24 PM
Site looks clean, easy on the eyes, but imo pretty generic in terms of blogs.
xUKHCx
Feb 9, 02:22 PM
Geeze with a machine that fast surely we can finally answer the question "Shall I buy now or wait?" :D
more...
sebisworld
Jan 7, 12:50 PM
That other useless feature - the shutdown - made the dialog pop up again. Now I can finally turn that vault off :-)
Thank you guys! I will never turn this on again.
Thank you guys! I will never turn this on again.
Tharian
May 6, 11:21 PM
1 to 1 is only offered at Apple stores or online. I've worked for Apple for years so I would know.
And yes, you can technically purchase it within 14 days, but when you go in the staff will do their best to get you to get it the same day.
-d
And yes, you can technically purchase it within 14 days, but when you go in the staff will do their best to get you to get it the same day.
-d
more...
SoftMango
Jan 26, 05:53 PM
Ok guys I just found this glitch within iREB to downgrade your ipod touch or iphone. I was trying to load up custom firmware to my ipod touch 2nd gen and I got stuck with a black screen, and I start to fiddle with itunes and ireb. Downgraded my 2nd generation ipod touch from 4.2.1 to 2.1.1 (the very first firmware for this model). Below ive put the instructions on how I did this. (Ive only tested this on my ipod, but it should work on anything that iREB can support.
iREB is not available for Mac users as of yet, will update if changes occur.
1)First you will need to change your hosts
Navigate to C:\Windows\System32\drivers\etc\ and locate “hosts” file.
Open this “hosts” file in Notepad and add this "74.208.105.171 gs.apple.com at the bottom of the note".
Credits to Komentra for the reply
2) Download iREB V4.0.x/4.1:
http://ih8sn0w.com/index.php/products/view/ireb.snow
3) Download the ipod firmware that you wish to downgrade to. (unless a new version of iREB is released, anything above 4.2.1 wont work. (I KNOW IT SAYS V4.0.x/4.1 BUT THATS PART OF THE GLITCH)
Download Firmware Here: http://www.felixbruns.de/iPod/firmware/
4) Plug in your iPod/iPhone and load up iREB.
5) Select your device from the menu.
6) Wait for iREB to put your device into its SPECIAL dfu mode. (not the normal one)
7) Now, open iTunes and wait for your iPod to come up, now heres where I was experimenting.
8) put your ipod into dfu mode (I know what your thinking "oh this guy is an idiot, he doesnt know what hes doing" well this where stuff gets interesting. You cant see whats going on the ipod but wait for those USB chimes so you will know what to press and when. - Hold both the power and home button at the same time untill you hear a usb sound from your computer. When that sound comes let go of the power button and keep holding the home button and wait for the second usb sound. -
9) Hold shift and click restore in itunes and find your old firmware (ie. 2.1.1)
10) AND YOUR DONE!
I know what your thinking again (im a mind reader) WHY WOULD YOU WANNA DO THIS? well for me, iOS 4.2.1 is a load of bull for me, it goes way too slow and jailbreaking it makes it even worse. and pretty much all I do on my ipod is listen to music and nothin else, no lies. Seriously, and if you need to downgrade for a practical reason, then why not.
This should work on any OLD firmware that is older then your current one. (again ive only tested this on 4.2.1)
Hope this helped.
SoftMango out.
Update For 1st & 2nd Generation devices
3.1.3 cannot be downgraded with this method. Here are the steps to solving this problem:
Download the following files:
Sn0wBreeze: http://www.mediafire.com/?2wt8v7yw1jlpnoc
Firmware 3.1.3: http://www.felixbruns.de/iPod/firmware/
1) Plug in your ipod touch/iphone
2) open sn0wbreeze and say ok to the release
3) go to the next step and browse the firmware (3.1.3)
4) On the next step click build ipsw
5) let the program create the custom firmware.
6) go to the next step and instructions will pop up showing you how to put your ipod into dfu mode.
7) follow the on screen steps and then your ipod will be put into a pwned state.
8) restore your ipod in itunes with the custom firmware that was made earlier.
9) Your Done!
I will be continually updating this thread when new stuff is out.
iREB is not available for Mac users as of yet, will update if changes occur.
1)First you will need to change your hosts
Navigate to C:\Windows\System32\drivers\etc\ and locate “hosts” file.
Open this “hosts” file in Notepad and add this "74.208.105.171 gs.apple.com at the bottom of the note".
Credits to Komentra for the reply
2) Download iREB V4.0.x/4.1:
http://ih8sn0w.com/index.php/products/view/ireb.snow
3) Download the ipod firmware that you wish to downgrade to. (unless a new version of iREB is released, anything above 4.2.1 wont work. (I KNOW IT SAYS V4.0.x/4.1 BUT THATS PART OF THE GLITCH)
Download Firmware Here: http://www.felixbruns.de/iPod/firmware/
4) Plug in your iPod/iPhone and load up iREB.
5) Select your device from the menu.
6) Wait for iREB to put your device into its SPECIAL dfu mode. (not the normal one)
7) Now, open iTunes and wait for your iPod to come up, now heres where I was experimenting.
8) put your ipod into dfu mode (I know what your thinking "oh this guy is an idiot, he doesnt know what hes doing" well this where stuff gets interesting. You cant see whats going on the ipod but wait for those USB chimes so you will know what to press and when. - Hold both the power and home button at the same time untill you hear a usb sound from your computer. When that sound comes let go of the power button and keep holding the home button and wait for the second usb sound. -
9) Hold shift and click restore in itunes and find your old firmware (ie. 2.1.1)
10) AND YOUR DONE!
I know what your thinking again (im a mind reader) WHY WOULD YOU WANNA DO THIS? well for me, iOS 4.2.1 is a load of bull for me, it goes way too slow and jailbreaking it makes it even worse. and pretty much all I do on my ipod is listen to music and nothin else, no lies. Seriously, and if you need to downgrade for a practical reason, then why not.
This should work on any OLD firmware that is older then your current one. (again ive only tested this on 4.2.1)
Hope this helped.
SoftMango out.
Update For 1st & 2nd Generation devices
3.1.3 cannot be downgraded with this method. Here are the steps to solving this problem:
Download the following files:
Sn0wBreeze: http://www.mediafire.com/?2wt8v7yw1jlpnoc
Firmware 3.1.3: http://www.felixbruns.de/iPod/firmware/
1) Plug in your ipod touch/iphone
2) open sn0wbreeze and say ok to the release
3) go to the next step and browse the firmware (3.1.3)
4) On the next step click build ipsw
5) let the program create the custom firmware.
6) go to the next step and instructions will pop up showing you how to put your ipod into dfu mode.
7) follow the on screen steps and then your ipod will be put into a pwned state.
8) restore your ipod in itunes with the custom firmware that was made earlier.
9) Your Done!
I will be continually updating this thread when new stuff is out.
VanneDC
Mar 19, 11:37 PM
no worries, glad to be of help govner,
depending on what your going to be using the G5 for mate, be very sceptical about getting caught up in the G5 upgrade current. The quicker 2.3 are not actually much quicker at all (cept the dual core models) and the 1.8ghz dualie runs great. I sometimes wish i handent sold mine. The 2.3ghz i have atm isnt that much quicker than the 1.8 i had before.
Vid cards make a massive diff in the G5 and with that 9800 pro you've got a great little card in your box. Just make sure you give it enough ram to function properly. I would recommend 2gig and upwards and as much as you can afford or scavenge.
I have 6gb in my 2.3 atm and it hoots.. esp if your going to be going with leopard. (which i recommend that you do )
that said, in regards to ram, try and grab all the same sticks. I have a mixed bag of nuts in mine and it does take longer to check the ram that it would with only 2 or 4 sticks in there. (cos i am a cheap skate, i even have several 256mb sticks in there, which are pretty useless :)
let us know how you get on and what sort of work your G5 will be doing..
cheerio
depending on what your going to be using the G5 for mate, be very sceptical about getting caught up in the G5 upgrade current. The quicker 2.3 are not actually much quicker at all (cept the dual core models) and the 1.8ghz dualie runs great. I sometimes wish i handent sold mine. The 2.3ghz i have atm isnt that much quicker than the 1.8 i had before.
Vid cards make a massive diff in the G5 and with that 9800 pro you've got a great little card in your box. Just make sure you give it enough ram to function properly. I would recommend 2gig and upwards and as much as you can afford or scavenge.
I have 6gb in my 2.3 atm and it hoots.. esp if your going to be going with leopard. (which i recommend that you do )
that said, in regards to ram, try and grab all the same sticks. I have a mixed bag of nuts in mine and it does take longer to check the ram that it would with only 2 or 4 sticks in there. (cos i am a cheap skate, i even have several 256mb sticks in there, which are pretty useless :)
let us know how you get on and what sort of work your G5 will be doing..
cheerio
more...
donga
Jan 14, 07:12 PM
both. just in two different ways.
CFreymarc
Jun 17, 10:56 PM
... there are likely substantial numbers of developers interested in the conference's content but who were unable to attend.
You have that right. This fast post and free to registered app developers is a big consolation prize not making it to the conference. There were a lot of "parasite parties" around WWDC in San Francisco this week full of people that didn't make it into the conference. Some where public, some were invitation only and some were in between.
You have that right. This fast post and free to registered app developers is a big consolation prize not making it to the conference. There were a lot of "parasite parties" around WWDC in San Francisco this week full of people that didn't make it into the conference. Some where public, some were invitation only and some were in between.
more...
zen.state
Apr 20, 08:23 AM
Seems to me that it is caused by a faulty video memory...
This is my guess also. I think if it was the GPU the video would be far worse or maybe not even work at all. Since the PowerBooks have dedicated video memory this can't be fixed with new system RAM as you wondered earlier in the thread.
Best solution would be a new logic board.
This is my guess also. I think if it was the GPU the video would be far worse or maybe not even work at all. Since the PowerBooks have dedicated video memory this can't be fixed with new system RAM as you wondered earlier in the thread.
Best solution would be a new logic board.
NT1440
Feb 17, 09:07 PM
Coheed & Cambria - The Neverender Concert Series (their entire discography)
John Mayer- Where the Light Is (Simply Amazing)
John Mayer- Where the Light Is (Simply Amazing)
more...
Starfox
May 2, 07:04 PM
How to: Download YouTube videos in Safari (http://mac.blorge.com/2010/03/04/how-to-download-youtube-videos-in-safari/)
Yup, found that while googling but it doesn't seem to work when using YouTube 5.
Yup, found that while googling but it doesn't seem to work when using YouTube 5.
dqpassat
Apr 16, 11:52 PM
I have a Monoprice adapter that DID NOT carry audio, just video to my TV from my i5 2.4 MBP. You have the same generation MBP, albeit a 2.53, so your mac has that ability.
I ended up picking this adapter from Amazon:
http://www.amazon.com/gp/product/B003CK8TZ8
This one will carry audio & video. Works perfectly and looks pretty cool too. Not as cheap as monoprice, but does the job.
I ended up picking this adapter from Amazon:
http://www.amazon.com/gp/product/B003CK8TZ8
This one will carry audio & video. Works perfectly and looks pretty cool too. Not as cheap as monoprice, but does the job.
more...
OttawaGuy
Jul 23, 05:50 PM
Would this work?
http://www.markspace.com/products/fliq/index.html
http://www.markspace.com/products/fliq/index.html
exhibit.b
Jun 19, 07:31 PM
Does anybody know if they sold out of phones today?
celebi23
Oct 16, 05:04 PM
http://i23.photobucket.com/albums/b355/eisnerguy1/westfarms_vert120104.jpg
Might as well kick this subforum off with a bang. :p So, who here is going to the West Farms Mall Apple Store for the Launch Party? :cool:
Might as well kick this subforum off with a bang. :p So, who here is going to the West Farms Mall Apple Store for the Launch Party? :cool:
big
Oct 30, 03:57 PM
> I read that a few times. Man it is so weird; is like the world coming to an end yet or something.
ummm, the end of the world will come when Apple has some real power.
ummm, the end of the world will come when Apple has some real power.
MisterMe
Mar 4, 09:44 PM
Thanks for responding so quickly. No, no chance of a different document. It is a very unique magazine. I have been working on this mag since last Monday - and have opened and closed it countless times. This is really STRANGE.
I'm not using backup software. I just use the 2nd hard drive to "double back up" in case. I do this at least once a day - or if I have done major changes to a job
With the permissions thing - I did a "file info" in another totally different job folder and went to details and changed the "group" access to "read and write" (cause it wasn't letting me save things in that folder even though me being the owner it said "read and write).
I am not on a network or anything - just a stand-alone osx 10.3.3
Have done a check and it doesn't seem to have affected anything elseFiles don't just suddenly revert to previous versions. It would appear that you last edited the file in your "double back up," that your back up file replaced your working file, or that you did not save your latest work.
I'm not using backup software. I just use the 2nd hard drive to "double back up" in case. I do this at least once a day - or if I have done major changes to a job
With the permissions thing - I did a "file info" in another totally different job folder and went to details and changed the "group" access to "read and write" (cause it wasn't letting me save things in that folder even though me being the owner it said "read and write).
I am not on a network or anything - just a stand-alone osx 10.3.3
Have done a check and it doesn't seem to have affected anything elseFiles don't just suddenly revert to previous versions. It would appear that you last edited the file in your "double back up," that your back up file replaced your working file, or that you did not save your latest work.
furcalchick
Oct 25, 11:12 AM
i'm shocked that there aren't that many macrumors members around here. im guessing this area only services lake o and the northern everglades.
nlivo
Jan 14, 08:12 AM
I'm a happy man this year. I have always wanted to watch the keynote without knowing anything about what has been released but could never resist (last year I was away from any sort of computer and then I open the newspaper and boom....the iPhone. I wasn't expecting anything because I live in Australia) but this year.....it will be 4 am when Steve takes the stage. So I'll happily wake up at around 9 am (I'm on holidays) and just watch the keynote with a glass of OJ. IT'LL BE AWESOME!!!!!
twoodcc
Oct 20, 01:16 PM
so i wonder how a Core i7-860 will do with folding? the top of the line iMacs seems to be shipping with this processor, and from looking at reviews of the processor, it seems to be a little faster than the core i7-920
