JoshBoy
Nov 30, 07:43 PM
downloading now..... finally!!!
navigates
Apr 29, 12:55 PM
It�s been a very long time until any news in and around unlocks is out now. During 3g, 3gs, the unlocks were very quick. On the IP4, the wait was around the latest release of the 4.3. Now we are 4.3.1. I believe 4.3.1 has changed the baseband again to a new algorithm. I'm not sure if they will hang on for some time with the new algorithm or release the unlock.
I just went for a short business trip and used data roaming which costs about 19.95 an MB. Trip was sudden and I didn't have the time to purchase the rebel or gevey.
In my opinion it is wrong in AT&T's part to not genuinely unlock the iPhone when there are legitimate users satisfying the contract. In any case they have an early termination fee any ways.
Instead of us pursing the dev team, we should start an online petition to enable AT&T unlocking the iPhone legally.
I just went for a short business trip and used data roaming which costs about 19.95 an MB. Trip was sudden and I didn't have the time to purchase the rebel or gevey.
In my opinion it is wrong in AT&T's part to not genuinely unlock the iPhone when there are legitimate users satisfying the contract. In any case they have an early termination fee any ways.
Instead of us pursing the dev team, we should start an online petition to enable AT&T unlocking the iPhone legally.
Orlandu
May 5, 12:02 PM
I'm getting the same thing. Whenever I open an app, I see a quick banner flash at the top of the screen as its zooming in to open it. When I look in processes with SBSettings, I see something called AdSheet. Is that from jailbreaking or something from the Apple iAds crap? When I end that process it stops the ads from showing up at the top but then it opens again whenever I open something with adds.
old-wiz
May 4, 06:50 PM
BBB ratings are no longer very reliable. You can get rid of a bad rating by buying advertising from BBB. I never trust a BBB rating anymore.
more...
blacktape242
Jan 20, 08:09 PM
yes i am beating a dead horse....but......
all these updates and not an iweb update is really disappointing.
is the application dead or not, come on apple!?!?!? :mad:
all these updates and not an iweb update is really disappointing.
is the application dead or not, come on apple!?!?!? :mad:
gnasher729
Mar 29, 03:40 PM
gnasher said to print out the call which I had done previous. There are no typos. But in fact I do have the same problem running it from the command line. Where does the & go?
You have a loop. The "system" command is executed each time in the loop. So when you enter "Q" to exit the loop, all the commands are executed again. That's what the printf should have shown you.
So what happens when you execute the second system () call? I don't expect it to work. I expect it to overwrite the output of the first system () command.
You have a loop. The "system" command is executed each time in the loop. So when you enter "Q" to exit the loop, all the commands are executed again. That's what the printf should have shown you.
So what happens when you execute the second system () call? I don't expect it to work. I expect it to overwrite the output of the first system () command.
more...
rockyroad55
May 6, 09:30 AM
10.
If it is your first, then buy either the base 21.5" or ultimate 27". From what I have been reading here, those two are the best so far since the base model of the 21.5" is such a large upgrade from any of the previous models. Since you aren't going to do anything crazy like many of us, you'll be pleasantly surprised with an iMac.
If it is your first, then buy either the base 21.5" or ultimate 27". From what I have been reading here, those two are the best so far since the base model of the 21.5" is such a large upgrade from any of the previous models. Since you aren't going to do anything crazy like many of us, you'll be pleasantly surprised with an iMac.
DeaconGraves
May 4, 11:00 PM
thank you soo much dude!!
oh, will this erase anything?
and do u no how i can get snow leopard back?
No, that will not erase everything, but what it will hopefully do is direct your computer to your startup disk so you will get back into Lion to do what you need (maybe back everything up?)
The re-install snow leopard insert your DVD, then restart the computer. Hold down the option bottom when you here the chimes and hold it until your boot options appear. One of them will be the DVD. Select it and wait for the installer to load (it may take a while). But honestly, get your paper done first and worry about that tomorrow.
oh, will this erase anything?
and do u no how i can get snow leopard back?
No, that will not erase everything, but what it will hopefully do is direct your computer to your startup disk so you will get back into Lion to do what you need (maybe back everything up?)
The re-install snow leopard insert your DVD, then restart the computer. Hold down the option bottom when you here the chimes and hold it until your boot options appear. One of them will be the DVD. Select it and wait for the installer to load (it may take a while). But honestly, get your paper done first and worry about that tomorrow.
more...
alansmallen
Oct 22, 05:28 PM
Kid with the fro
rdowns
Feb 27, 08:22 AM
Oh yeah, what the hell does Obama know abut marriage? He only has 1 while Beck has 2 and Gingrich 3. We told you that Obama didn't have enough experience during the election.
more...
paulypants
Mar 11, 12:49 PM
Recently I have had an issue where if I get 1 piece of new mail the Dock Icon tells me that there is 3 instead of one. If I quit and relaunch Mail it will display correclty...any ideas?
thanks...
thanks...
Zen0Jin
May 6, 03:29 PM
LCDs looks horrible when not ran at their native resolution. You will definitely want to run it at 2560x1600. If the text is too small, sit closer or make the fonts bigger.
Um... no...
My 27" looks great @ 1920x1080...
In games, you can't tell the difference.
Um... no...
My 27" looks great @ 1920x1080...
In games, you can't tell the difference.
more...
ZicklePop
Aug 17, 02:01 PM
Hey can you guys tell me what I need to change to become valid html?
Result: Tentatively passed validation
File: test.html
Encoding: utf-8
Doctype: -//W3C//DTD HTML 4.01 TRANSITIONAL//EN
Unknown Parse Mode!
The MIME Media Type (text/html) for this document is used to serve both SGML and XML based documents, and it is not possible to disambiguate it based on the DOCTYPE Declaration in your document. Parsing will continue in SGML mode.
No DOCTYPE found!
Attempting validation with HTML 4.01 Transitional.
The DOCTYPE Declaration was not recognized or is missing. This probably means that the Formal Public Identifier contains a spelling error, or that the Declaration is not using correct syntax. Validation has been performed using a default "fallback" Document Type Definition that closely resembles "HTML 4.01 Transitional", but the document will not be Valid until you have corrected this problem with the DOCTYPE Declaration.
This Page Is Tentatively Valid -//W3C//DTD HTML 4.01 TRANSITIONAL//EN
The uploaded document "test.html" was checked and found to be tentatively valid -//W3C//DTD HTML 4.01 TRANSITIONAL//EN. This means that with the use of some fallback or override mechanism, we successfully performed a formal validation using an SGML or XML Parser. In other words, the document would validate as -//W3C//DTD HTML 4.01 TRANSITIONAL//EN if you changed the markup to match the changes we have performed automatically, but it will not be valid until you make these changes
The code I have for this so far is:
What else do I need to become valid?
Result: Tentatively passed validation
File: test.html
Encoding: utf-8
Doctype: -//W3C//DTD HTML 4.01 TRANSITIONAL//EN
Unknown Parse Mode!
The MIME Media Type (text/html) for this document is used to serve both SGML and XML based documents, and it is not possible to disambiguate it based on the DOCTYPE Declaration in your document. Parsing will continue in SGML mode.
No DOCTYPE found!
Attempting validation with HTML 4.01 Transitional.
The DOCTYPE Declaration was not recognized or is missing. This probably means that the Formal Public Identifier contains a spelling error, or that the Declaration is not using correct syntax. Validation has been performed using a default "fallback" Document Type Definition that closely resembles "HTML 4.01 Transitional", but the document will not be Valid until you have corrected this problem with the DOCTYPE Declaration.
This Page Is Tentatively Valid -//W3C//DTD HTML 4.01 TRANSITIONAL//EN
The uploaded document "test.html" was checked and found to be tentatively valid -//W3C//DTD HTML 4.01 TRANSITIONAL//EN. This means that with the use of some fallback or override mechanism, we successfully performed a formal validation using an SGML or XML Parser. In other words, the document would validate as -//W3C//DTD HTML 4.01 TRANSITIONAL//EN if you changed the markup to match the changes we have performed automatically, but it will not be valid until you make these changes
The code I have for this so far is:
What else do I need to become valid?
Rot'nApple
Apr 22, 02:01 PM
LAUNCH?!
Wrong word & phrase...
Should be... "It's About Time!" :rolleyes:
/
/
/
Wrong word & phrase...
Should be... "It's About Time!" :rolleyes:
/
/
/
more...
PixelOz
Jan 3, 10:53 PM
Regenerating Nostalgia - Apple Wallpaper HD
This is a wallpaper that I did in Blender 3D as a tribute to the golden days of computing in the 80s when computers still had limited colors and sound and when they still had limited multimedia capabilities but they were starting to move very fast in that direction.
Those were the days when personal computers were starting to move into the mainstream which led to their eventual acceptance in the 90s as another household item so the pretty logo may bring back some fond memories for some people.
It's in many resolutions from 1024 x 768 all the way to 2560 x 1600 pixels in several different aspect ratios like 4:3, 16:10, 16:9, etc. and I also adapted it to 4:6 ratio IPhone format with 320 x 480 resolution and also 640 x 960 resolution. I used very little compression to preserve a higher quality. The IPhone versions were cropped from the high res render so they are not as optimal but they still look a bit good and they also have the old Apple letters logo in them.
I wanted to do something in 3D with a pseudo sci-fi theme cause I like sci-fi a lot. It was started in Blender 2.49b and finished in Blender 2.5x (about the second half of the work) and one of the reasons that I moved it to the new Blender fast was because it had a much faster renderer and I was planing to use the internal Blender renderer only and see what it could do cause it has become quite capable and one can get pretty decent results with it with a little bit of effort.
It took quite a while to render (like a day and a half) even on a i7 2.66 Ghz CPU with all 8 threads cause I rendered it in very high resolution and it uses ambient occlusion and quite a few lights with many samples. It also has some post processing in Photoshop CS4 for some glow effects and a bit of correction of color and light in some areas.
So there it is, I hope that some people from the old school of computing and/or sci-fi fans like me and others like it. You can modify it as long as it is for your own personal use.
You can download it from here:
Deviantart:
http://fav.me/d36deof
Mediafire:
http://www.mediafire.com/file/gvfcwrdz7c3o2i7/RegeneratingNostalgia-AppleWallpaperVer1-0.zip
This is a wallpaper that I did in Blender 3D as a tribute to the golden days of computing in the 80s when computers still had limited colors and sound and when they still had limited multimedia capabilities but they were starting to move very fast in that direction.
Those were the days when personal computers were starting to move into the mainstream which led to their eventual acceptance in the 90s as another household item so the pretty logo may bring back some fond memories for some people.
It's in many resolutions from 1024 x 768 all the way to 2560 x 1600 pixels in several different aspect ratios like 4:3, 16:10, 16:9, etc. and I also adapted it to 4:6 ratio IPhone format with 320 x 480 resolution and also 640 x 960 resolution. I used very little compression to preserve a higher quality. The IPhone versions were cropped from the high res render so they are not as optimal but they still look a bit good and they also have the old Apple letters logo in them.
I wanted to do something in 3D with a pseudo sci-fi theme cause I like sci-fi a lot. It was started in Blender 2.49b and finished in Blender 2.5x (about the second half of the work) and one of the reasons that I moved it to the new Blender fast was because it had a much faster renderer and I was planing to use the internal Blender renderer only and see what it could do cause it has become quite capable and one can get pretty decent results with it with a little bit of effort.
It took quite a while to render (like a day and a half) even on a i7 2.66 Ghz CPU with all 8 threads cause I rendered it in very high resolution and it uses ambient occlusion and quite a few lights with many samples. It also has some post processing in Photoshop CS4 for some glow effects and a bit of correction of color and light in some areas.
So there it is, I hope that some people from the old school of computing and/or sci-fi fans like me and others like it. You can modify it as long as it is for your own personal use.
You can download it from here:
Deviantart:
http://fav.me/d36deof
Mediafire:
http://www.mediafire.com/file/gvfcwrdz7c3o2i7/RegeneratingNostalgia-AppleWallpaperVer1-0.zip
AppledUp
Apr 26, 11:13 PM
I know it can be done so do not post saying it's impossible, there are adapters that allow you to and ones to play it connecting it to your MBP then to the apple display, but how could I do that? What adapters would I need and how steep of a price am I looking at?
more...
alust2013
Mar 23, 12:08 PM
If you have the bootcamp utility installed, you should be able to start OS X from there.
jph.daulte
Feb 15, 11:07 AM
I don't know; at the 1st installation (10.3 + 10.3.7 combo + 10.3.8 patch + applications), everything was working untill I red my emails and tried to save as .pdf and try to print a popup of this web page; http://store.dxo.com/login.asp?LID=2.
For the 2nd installation, I did (10.3 + 10.3.7 combo + 10.3.8 patch) but in safe boot mode. So I don't know...
Now I'm still working in safe boot mode.
jphd
For the 2nd installation, I did (10.3 + 10.3.7 combo + 10.3.8 patch) but in safe boot mode. So I don't know...
Now I'm still working in safe boot mode.
jphd
v66jack
Apr 11, 07:00 PM
And i refuse to buld suitcases for windows laptops...:-)
Good for you!!!
Good for you!!!
liza123
Aug 11, 04:14 AM
Hi,
Apple's MobileMe Gallery application has received a minor update today, fixing a few bugs while delivering new support for iPhone 4. With the update, the application can now download higher-resolution versions of images hosted on MobileMe when used on an iPhone 4 and connecting over Wi-Fi. The change allows users to take advantage of iPhone 4's 960 x 640 "Retina" display to view images in crisper detail.I been very disappointed with support with the iPad and mobile me,
Company Name Ideas (http://www.squadhelp.com)
Apple's MobileMe Gallery application has received a minor update today, fixing a few bugs while delivering new support for iPhone 4. With the update, the application can now download higher-resolution versions of images hosted on MobileMe when used on an iPhone 4 and connecting over Wi-Fi. The change allows users to take advantage of iPhone 4's 960 x 640 "Retina" display to view images in crisper detail.I been very disappointed with support with the iPad and mobile me,
Company Name Ideas (http://www.squadhelp.com)
chrismacguy
Apr 27, 02:13 PM
Coolio! - *adds name to list of people who want pics*
It would also be interesting to see if the person who had it kept the HD - It is unlikely, but it could have an early development build of Mac OS X Installed - as even back then Apple had Internal Builds for Prototypes to handle all the extra I/O.
It would also be interesting to see if the person who had it kept the HD - It is unlikely, but it could have an early development build of Mac OS X Installed - as even back then Apple had Internal Builds for Prototypes to handle all the extra I/O.
ucfgrad93
Feb 28, 09:12 PM
Holy crap, that was an amazing video! Thanks for sharing!
My wallpaper for the month of February was in honor of Discovery's last flight.
My wallpaper for the month of February was in honor of Discovery's last flight.
igucl
Sep 25, 08:56 PM
OK. Thank you, Blue, for the tip. I just wanted to try it:
GeekOFComedy
Apr 11, 10:35 AM
=====-----=====
=====-----=====
From http://support.apple.com/kb/ht1564
(Mac OS X: What is Safe Boot, Safe Mode?)
"Mac OS X v10.5.6 or later: A Safe Boot deletes the dynamic loader shared cache at (/var/db/dyld/). A cache with issues may cause a blue screen on startup, particularly after a Software Update. Restarting normally recreates this cache."
=====-----=====
From http://support.apple.com/kb/ht1455
(Mac OS X: Starting up in Safe Mode)
"To start up into Safe Mode (to Safe Boot), do this:
1. Be sure your Mac is shut down.
2. Press the power button.
3. Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
4. Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear)."
=====-----=====
:)
=====-----=====
Tried safe boot, didn't even boot in safe boot
=====-----=====
From http://support.apple.com/kb/ht1564
(Mac OS X: What is Safe Boot, Safe Mode?)
"Mac OS X v10.5.6 or later: A Safe Boot deletes the dynamic loader shared cache at (/var/db/dyld/). A cache with issues may cause a blue screen on startup, particularly after a Software Update. Restarting normally recreates this cache."
=====-----=====
From http://support.apple.com/kb/ht1455
(Mac OS X: Starting up in Safe Mode)
"To start up into Safe Mode (to Safe Boot), do this:
1. Be sure your Mac is shut down.
2. Press the power button.
3. Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
4. Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear)."
=====-----=====
:)
=====-----=====
Tried safe boot, didn't even boot in safe boot
