KeithPratt
Apr 15, 11:58 AM
Maybe Version 5 is better in saving the correct PAL-solution not adding pixels that are not needed, while recording.
If you've got your VCR hooked up to a DV camcorder and the DV camcorder attached to your Mac via Firewire, you can think of capturing it in iMovie as a file transfer. The camcorder is encoding the VCR's output to standard PAL DV, and your Mac is just recording that data.
If you try to do any colour correction or what have you in iMovie, a different engine in different versions might result in different quality. But these versions are so old I don't think you'll find much comparison online � probably best to just suck it and see.
If you've got your VCR hooked up to a DV camcorder and the DV camcorder attached to your Mac via Firewire, you can think of capturing it in iMovie as a file transfer. The camcorder is encoding the VCR's output to standard PAL DV, and your Mac is just recording that data.
If you try to do any colour correction or what have you in iMovie, a different engine in different versions might result in different quality. But these versions are so old I don't think you'll find much comparison online � probably best to just suck it and see.
guyute
Nov 13, 12:47 AM
I ran across this program the other day and have been using it. The speed of this version of firefox is much faster than safari or ff1.0. Here is a link to the site.
http://www.beatnikpad.com/archives/2004/11/06/firefoxG5
http://www.beatnikpad.com/archives/2004/11/06/firefoxG5
sikkinixx
Mar 26, 08:57 PM
how much time are we talking and when do you start? I have another 3 weeks in my semester but then I am free. And I have quite the soft spot for 2D sprite-esc gaming.
DanTheMan
Dec 22, 05:51 PM
This is not true. the ICE works with several after-market brands like Sony, Kenwood, Alpine, etc. If you had one of these in your car, and got a new one, you would merely have to move the radio to the new car.
True, but the problem I have is then my steering wheel controls would not work unless I go out and spend another $200 on a solution for that too, plus the cost of an aftermarket stereo. Gets really expensive really quick.
It probably is a little more complicated than just swapping out the cable, I bet the controller unit on the ICE-Link is programmed specifically for the car's factory head unit. Maybe the Monster one will be a little more flexible.
True, but the problem I have is then my steering wheel controls would not work unless I go out and spend another $200 on a solution for that too, plus the cost of an aftermarket stereo. Gets really expensive really quick.
It probably is a little more complicated than just swapping out the cable, I bet the controller unit on the ICE-Link is programmed specifically for the car's factory head unit. Maybe the Monster one will be a little more flexible.
more...
Cybergypsy
Sep 2, 06:25 PM
Not all though. I check my e-mail 2-3 times per month.Dang you must be loaded with spam!
alust2013
Apr 24, 12:30 AM
It may have something running in the background that prevents the automatic sleeping. Check system prefs, accounts, your account, login items to see if it starts up automatically at login. If it does, select that and click the minus button. You can also check activity monitor to see if there are programs running in the background keeping it awake.
more...
legreve
Mar 13, 03:07 AM
Pretty nice start Royce. The whole learning to film and video edit is about trying something out, look at it with a critical eye and the fix what can be better... And with your age, and effort, you could probably become really good. You seem to have a basic idea of what you want to do.
Now to the constructive critisism :)
I think looking at these videos, my next move would be to try and stabilize the shots even more. Make your pans really smoothe... do this by panning 1-2 secs more than you want in each end of the shot and then edit that part out. It's often the beginning and the end where some stuttering occurs, especially if you don't have a video head for the stand.
"Less is more"... a popular phrase that still holds merit. In this case try to give more variation to your zoom shots. I think I noticed 3 zooms in a row... that might be too much for some. Also do test runs with these zooms so it's nice and tight and you don't have to adjust angle during the zoom.
You know, one thing I absolutely love is sideways dolly shots. This can ofcourse be a bit hard without an actual dolly, but you can achieve something similar with a homemade stabilizer (the t-section one with metal piping works pretty good...). Then do the finishing touches in something like AE or anything else that can track movement.
I don't want to sound like you did a poor job, because you didn't. I wish more guys like you would spend time learning how to do this job.
So get out there, and like you said, you can make movies about anything... don't let anyone tell you you can't do this or that. Your imagination will decide what's right!
:)
Edit: realised I didn't see your mud race vid. I actually think that was nicely done, apart from the excessive contrast ;) (a matter of taste, some like it some don't... let the client decide.) Your zooms worked fine and the freehand motion came more to its right here than on the beach.
I might sound old fasioned, but I like when the camera movement fits the atmosphere of the scene... therefore a more tranquil movement might have suited the beach shots better. Where the raw action environment of the huge trucks work excellent with hard zooms and a little motion in the pans.
Now to the constructive critisism :)
I think looking at these videos, my next move would be to try and stabilize the shots even more. Make your pans really smoothe... do this by panning 1-2 secs more than you want in each end of the shot and then edit that part out. It's often the beginning and the end where some stuttering occurs, especially if you don't have a video head for the stand.
"Less is more"... a popular phrase that still holds merit. In this case try to give more variation to your zoom shots. I think I noticed 3 zooms in a row... that might be too much for some. Also do test runs with these zooms so it's nice and tight and you don't have to adjust angle during the zoom.
You know, one thing I absolutely love is sideways dolly shots. This can ofcourse be a bit hard without an actual dolly, but you can achieve something similar with a homemade stabilizer (the t-section one with metal piping works pretty good...). Then do the finishing touches in something like AE or anything else that can track movement.
I don't want to sound like you did a poor job, because you didn't. I wish more guys like you would spend time learning how to do this job.
So get out there, and like you said, you can make movies about anything... don't let anyone tell you you can't do this or that. Your imagination will decide what's right!
:)
Edit: realised I didn't see your mud race vid. I actually think that was nicely done, apart from the excessive contrast ;) (a matter of taste, some like it some don't... let the client decide.) Your zooms worked fine and the freehand motion came more to its right here than on the beach.
I might sound old fasioned, but I like when the camera movement fits the atmosphere of the scene... therefore a more tranquil movement might have suited the beach shots better. Where the raw action environment of the huge trucks work excellent with hard zooms and a little motion in the pans.
cocacolakid
May 4, 03:03 PM
Getting to the point, for video cards try lowendmac.com they have forums dedicated to ppc and I'm sure they have all the different and best cards available for your g5.
It's actually a group and not a typical forum, but it has hundreds of helpful members. Here's the link (http://lowendmac.com/lists/g-list.shtml) to a page about it, and the link (http://groups.google.com/group/g3-5-list?pli=1) to the actual google group.
It's actually a group and not a typical forum, but it has hundreds of helpful members. Here's the link (http://lowendmac.com/lists/g-list.shtml) to a page about it, and the link (http://groups.google.com/group/g3-5-list?pli=1) to the actual google group.
more...
garzy
Apr 26, 10:36 PM
Originally posted by bfj
... I stopped by WalMart, and bought one of the 499 HP bundles...
Panelled, v-neck cardigan in a
more...
plunging v-neck cardigan
Organic Pima Cotton Cardigan
more...
Seamed V-Neck Sweater
... I stopped by WalMart, and bought one of the 499 HP bundles...
brn2ski00
Jun 24, 01:04 PM
Payment sent. Sorry for the delay.
Payment Received. Will ship out tomorrow.
PINK and ORANGE are still available.
Get 'em quick!
Payment Received. Will ship out tomorrow.
PINK and ORANGE are still available.
Get 'em quick!
more...
Aravintht
Jun 18, 05:20 PM
i'll be there too.
i have a personal shopping appointment at 9.
most likely will turn up just before 8 though if its not raining.
i have a personal shopping appointment at 9.
most likely will turn up just before 8 though if its not raining.
nednarm
Apr 1, 12:57 PM
I can't figure this one out. I successfully jailbroke my 1st gen iPad after using pwnage tool and tetheredboot.
However when I open cydia and do the required updates it asks me to reboot, so I do so but it keeps on going through a boot loop.
I then put it in DFU and do the tetheredboot command in terminal but it fails every time saying:
Macintosh-6:~ Eddy$ /Users/Eddy/Desktop/tetheredboot/tetheredboot -i/Users/Eddy/Desktop/tetheredboot/iBSS.k48ap.RELEASE.dfu -k/Users/Eddy/Desktop/tetheredboot/kernelcache.release.k48
Initializing libpois0n
Waiting for device to enter DFU mode
opening device 05ac:1227...
Found device in DFU mode
Checking if device is compatible with this jailbreak
Checking the device type
Identified device as iPad1,1
Preparing to upload limera1n exploit
Resetting device counters
Sending chunk headers
Sending exploit payload
Sending fake data
libusb:error [darwin_transfer_status] transfer error: timed out
libusb:error [darwin_reset_device] ResetDevice: device not responding
Exploit sent
Reconnecting to device
libusb:error [darwin_close] USBDeviceClose: no connection to an IOService
Waiting 2 seconds for the device to pop up...
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Command completed successfully
Unable to reconnect
Unable to upload exploit data
Exploit injection failed!
So then my only option is to restore again through itunes and rejailbreak which means I loose the updates I install. I've done this about 5 times now and it's really pissing me off.
Is snowbreeze more reliable then the method I'm using? If so I may have to boot in bootcamp and try.
However when I open cydia and do the required updates it asks me to reboot, so I do so but it keeps on going through a boot loop.
I then put it in DFU and do the tetheredboot command in terminal but it fails every time saying:
Macintosh-6:~ Eddy$ /Users/Eddy/Desktop/tetheredboot/tetheredboot -i/Users/Eddy/Desktop/tetheredboot/iBSS.k48ap.RELEASE.dfu -k/Users/Eddy/Desktop/tetheredboot/kernelcache.release.k48
Initializing libpois0n
Waiting for device to enter DFU mode
opening device 05ac:1227...
Found device in DFU mode
Checking if device is compatible with this jailbreak
Checking the device type
Identified device as iPad1,1
Preparing to upload limera1n exploit
Resetting device counters
Sending chunk headers
Sending exploit payload
Sending fake data
libusb:error [darwin_transfer_status] transfer error: timed out
libusb:error [darwin_reset_device] ResetDevice: device not responding
Exploit sent
Reconnecting to device
libusb:error [darwin_close] USBDeviceClose: no connection to an IOService
Waiting 2 seconds for the device to pop up...
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Connection failed. Waiting 1 sec before retry.
Command completed successfully
Unable to reconnect
Unable to upload exploit data
Exploit injection failed!
So then my only option is to restore again through itunes and rejailbreak which means I loose the updates I install. I've done this about 5 times now and it's really pissing me off.
Is snowbreeze more reliable then the method I'm using? If so I may have to boot in bootcamp and try.
more...
Catfish_Man
Jul 8, 09:52 AM
Originally posted by boxcar
i got the superdrive. only because that is what the apple store in NH had in stock (no sales tax and a 30min drive from boston)
v neck and button front.
more...
Easy-fitting V-neck tunic top
Sexy Golden Linen
more...
sleeve v-neck is in a
Handknit Fair Isle V-Neck in
Women#39;s White Deep-v Linen
i got the superdrive. only because that is what the apple store in NH had in stock (no sales tax and a 30min drive from boston)
87racer
May 1, 10:28 PM
Log into another fresh account. Make sure it works there. Then delete your actual account's finder preferences. That should do it.
Didn't work for me. I also see this on two different 10.7 installs. Using the keyboard shortcuts or the menu bar to arrange by still works just no right click.
See screenshot for list of keyboard shortcuts.
Didn't work for me. I also see this on two different 10.7 installs. Using the keyboard shortcuts or the menu bar to arrange by still works just no right click.
See screenshot for list of keyboard shortcuts.
more...
twentytwo22
Apr 8, 05:08 PM
Do you have SHSH blobs saved for 4.2.1. If you do then upgrade to 4.3.1 and save your SHSH blobs and then downgrade back to 4.2.1 using your 4.2.1 blobs.
This makes absolutely no sense. Even from 4.2.1 you can save your 4.3.1 blobs.
This makes absolutely no sense. Even from 4.2.1 you can save your 4.3.1 blobs.
Chimpy
Feb 3, 01:00 PM
For those who are expressing confusion, here's a cleaned-up version:
I was supposed to trade this to another member, but the member never shipped his phone as agreed; he just printed a label and never shipped his phone. Luckily, I was able to have mine sent back to me.
Therefore, I am looking to trade this phone for a unlocked 4GB iPhone. Your phone must work on T-Mobile. I have tons of refs here and have sold over 100 items....
Please PM me if you want to trade, I really need it. I also do not use MP3s or play videos so a 4GB model is all I need. :)
You will also get the 100.00 rebate....
Not trying to be a smart-aleck, honestly, just trying to help (plus, I was in an editing mood :)).
I was supposed to trade this to another member, but the member never shipped his phone as agreed; he just printed a label and never shipped his phone. Luckily, I was able to have mine sent back to me.
Therefore, I am looking to trade this phone for a unlocked 4GB iPhone. Your phone must work on T-Mobile. I have tons of refs here and have sold over 100 items....
Please PM me if you want to trade, I really need it. I also do not use MP3s or play videos so a 4GB model is all I need. :)
You will also get the 100.00 rebate....
Not trying to be a smart-aleck, honestly, just trying to help (plus, I was in an editing mood :)).
more...
MacAztec
Apr 9, 07:29 PM
I'm taking the summer off, and after having saved up quite a bit of money, I'd like to visit Europe. Here's my current plan, and I'd really just like some input from fellow board members that travel a lot, have visited these places, etc.
Los Angles > Lisbon, Portugal
Lisbon would be my first stop. I'd like to do some surfing, scuba diving, and exploring while here. Potentially work my way around other places in Portugal too (Porto maybe).
Portugal > Spain
I don't know much about this leg of the trip, but I'd like to visit Madrid and Barcelona.
Spain > France
I'll work my way around the south of France, before heading up to Paris.
France > Germany
A friend in Germany is taking time off, and has a car. She will show me her favorite things in the country.
Germany > Czech Republic
Praha! I know this will be fun.
Czech Republic > Austria > Hungary > Croatia
THis will be near the end of the trip, but I'd hope to do as much as possible in these cities.
I'm looking for advice on must see places, places to skip (possibly even whole countries), and anything else you great members might have to add!
Thanks!
Los Angles > Lisbon, Portugal
Lisbon would be my first stop. I'd like to do some surfing, scuba diving, and exploring while here. Potentially work my way around other places in Portugal too (Porto maybe).
Portugal > Spain
I don't know much about this leg of the trip, but I'd like to visit Madrid and Barcelona.
Spain > France
I'll work my way around the south of France, before heading up to Paris.
France > Germany
A friend in Germany is taking time off, and has a car. She will show me her favorite things in the country.
Germany > Czech Republic
Praha! I know this will be fun.
Czech Republic > Austria > Hungary > Croatia
THis will be near the end of the trip, but I'd hope to do as much as possible in these cities.
I'm looking for advice on must see places, places to skip (possibly even whole countries), and anything else you great members might have to add!
Thanks!
appleguy123
May 7, 01:38 AM
I would you want AT&T to put this Orwellian rule into effect? At least tell me you're a shareholder...
BornAgainMac
Jan 7, 11:59 AM
Most people don't really need to have this feature. Michael Jackson probably uses FileVault. :eek:
Littleodie914
Nov 28, 08:47 PM
Does anyone know anything about those thin-looking Plextor DVD burners? Thanks!
WardC
Mar 31, 11:09 AM
There are a few pippins up on eBay now - grab one while you can!!
http://cgi.ebay.com/Bandai-Apple-Pippin-atMark-Import-Japan-Tested-Rare_W0QQitemZ150425505676QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item23060f0f8c#ht_945wt_1161
http://cgi.ebay.com/Apple-Bandai-Pippin_W0QQitemZ260570423143QQcmdZViewItemQQptZVideo_Games?hash=item3cab351f67#ht_2807wt_1161
http://cgi.ebay.com/NEW-RARE-Apple-Bandai-Pippin-AtMark-PC-Console_W0QQitemZ220578484703QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item335b8091df#ht_794wt_1161
http://cgi.ebay.com/Bandai-Apple-Pippin-atMark-Import-Japan-Tested-Rare_W0QQitemZ150425505676QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item23060f0f8c#ht_945wt_1161
http://cgi.ebay.com/Apple-Bandai-Pippin_W0QQitemZ260570423143QQcmdZViewItemQQptZVideo_Games?hash=item3cab351f67#ht_2807wt_1161
http://cgi.ebay.com/NEW-RARE-Apple-Bandai-Pippin-AtMark-PC-Console_W0QQitemZ220578484703QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item335b8091df#ht_794wt_1161
mokeiko
Apr 5, 04:15 AM
Trueprint, direct printing from your iPad to a networked printer. I used Printopia but this required to be installed on another Mac and your Mac had to always be on in order to print.
mokeiko
mokeiko
liketom
Dec 9, 12:25 PM
but steve has not got control over my remote control ....yet ;)
Mattie Num Nums
Sep 22, 01:29 PM
Apple always credits responsible reporters of security issues.
They don't always. Just like they don't always acknowledge security issues within OSX.
They don't always. Just like they don't always acknowledge security issues within OSX.
