Biff...
Feb 22, 04:21 PM
Good time to buy in my book. Apple stock in particular, especially because of all the release events in the pipe line this year.
seek3r
Apr 26, 12:51 AM
Just so you know there are no military applications that benefit from this.
Well, that's not true either, weapons modeling comes to mind for one, so does mapping and GIS work, nuclear physics, both modeling (though, like MD, most likely done on a cluster, not local) and post-process...
Well, that's not true either, weapons modeling comes to mind for one, so does mapping and GIS work, nuclear physics, both modeling (though, like MD, most likely done on a cluster, not local) and post-process...
itickings
Apr 8, 01:12 PM
I seem to be able to receive packets from outside my LAN...
what I do not understand is why I cannot establish a connection with a telnet call...
Pretty simple. You are on your LAN, not the Internet. Use your local IP and it will work fine. If you are connected to the Internet from somewhere outside your LAN, use your router's public IP address.
If you try to connect to your routers public IP address from inside, it won't route back. Some routers can be configured to do that, but most can't.
Since your firewall appears to be correctly opened, the problem is either that you're trying from within the LAN, or there is another firewall between the computer running telnet and your router that stops the traffic.
what I do not understand is why I cannot establish a connection with a telnet call...
Pretty simple. You are on your LAN, not the Internet. Use your local IP and it will work fine. If you are connected to the Internet from somewhere outside your LAN, use your router's public IP address.
If you try to connect to your routers public IP address from inside, it won't route back. Some routers can be configured to do that, but most can't.
Since your firewall appears to be correctly opened, the problem is either that you're trying from within the LAN, or there is another firewall between the computer running telnet and your router that stops the traffic.
Cromulent
Dec 28, 12:39 PM
Done.
All invitations are gone now.
All invitations are gone now.
more...
tytanic11
Jun 10, 10:07 AM
Nope, Macs still make more money.
Macs are still a higher profit margin and responsible for more revenue - but the iPod/iPhone lines introduce customers to Apple as a company. People who buy Apple's devices are more likely to buy a Mac later, so they are still important even if they don't make much revenue.
Macs are still a higher profit margin and responsible for more revenue - but the iPod/iPhone lines introduce customers to Apple as a company. People who buy Apple's devices are more likely to buy a Mac later, so they are still important even if they don't make much revenue.
lee14160
Apr 28, 01:59 PM
When you jail break something you must accept the fact some thing is going to go wrong. Just the nature of the beast.:)
more...
bally555
Apr 23, 01:52 PM
This is what you are looking for. I took a screen shot from the page of the Air 2010's service manual.
hob
Oct 17, 06:17 AM
Wow, that was sweet!
But yes, make that Apple logo appear for an extra 1.5-2 seconds or so. :)
Well, yeah - I played around with that, I just thought it went well with the music as it is, but maybe I'll re-hash it and add a 24" as well...
it won't load for me - anyone else with that problem?
D
i don't know why that is, it seems to take a lot longer than last night when I uploaded it.
I've mirrorred it on YouTube (http://www.youtube.com/watch?v=2MdW-X0L_-U), but of course it's nothing like as good quality, and to make matters worse it comes out in the wrong ratio!
But yes, make that Apple logo appear for an extra 1.5-2 seconds or so. :)
Well, yeah - I played around with that, I just thought it went well with the music as it is, but maybe I'll re-hash it and add a 24" as well...
it won't load for me - anyone else with that problem?
D
i don't know why that is, it seems to take a lot longer than last night when I uploaded it.
I've mirrorred it on YouTube (http://www.youtube.com/watch?v=2MdW-X0L_-U), but of course it's nothing like as good quality, and to make matters worse it comes out in the wrong ratio!
more...
ethana
May 2, 03:06 PM
28th Production week, 2007. 200 MHZ CPU speed, A1203, 8GB. To know more, we need more information. Why do you want to know?
What more information would you like?
Specifically I'd like to know more about the production date. Was it one of the first iPhone 2G's sold? Or one of the last? Obviously it was made in 2007 so at least it was within the first year. What is the earlier known "production week" for an iPhone 2G?
What more information would you like?
Specifically I'd like to know more about the production date. Was it one of the first iPhone 2G's sold? Or one of the last? Obviously it was made in 2007 so at least it was within the first year. What is the earlier known "production week" for an iPhone 2G?
xxBURT0Nxx
May 5, 10:26 AM
Correct me if I'm wrong, but I believe SSD's with the Sandforce controller such as the Vertex 3 don't need TRIM as the controller takes care of this function.
yeah that's what i have heard as well...
to be honest i wouldn't even really worry about it... i don't think it's going to drastically kill the performance of your ssd and require replacement after a year. By the time your ssd does end up failing, whether you have trim enabled or not, ssd's will likely have come down in price A LOT, and you will want to upgrade to a bigger one anyways.
just my .02 but i know all the worry warts will insist they need trim... i guess do whatever makes you feel comfortable.
yeah that's what i have heard as well...
to be honest i wouldn't even really worry about it... i don't think it's going to drastically kill the performance of your ssd and require replacement after a year. By the time your ssd does end up failing, whether you have trim enabled or not, ssd's will likely have come down in price A LOT, and you will want to upgrade to a bigger one anyways.
just my .02 but i know all the worry warts will insist they need trim... i guess do whatever makes you feel comfortable.
more...
profets
Feb 23, 10:13 AM
^Awesome to hear, thanks for the update. It seems like an SSD is a no-brainer if one wants to do an upgrade. I've used a few SSDs in netbooks and some PCs and the difference always amazes me.
Planning on picking up a Mini at some point and putting an SSD.. looks like its quite the process. Wish it was easier to do in an iMac as well.
Planning on picking up a Mini at some point and putting an SSD.. looks like its quite the process. Wish it was easier to do in an iMac as well.
imacgeek
Jan 6, 11:35 AM
The date is getting closer, we need to decide a place, can we make it a Starbucks or something, it IS San Francisco! I will be there for sure.
:apple:world
:apple:world
more...
Corbin052198
Nov 10, 02:38 PM
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 3_1_3 like Mac OS X; en-us) AppleWebKit/528.18 (KHTML, like Gecko) Version/4.0 Mobile/7E18 Safari/528.16)
makes sense, considering the bog of traffic they'd want to control
Yeah, I think Angry Birds Christmas would blow the roof off their Mac Minis :D
makes sense, considering the bog of traffic they'd want to control
Yeah, I think Angry Birds Christmas would blow the roof off their Mac Minis :D
sparkleytone
Jul 6, 10:20 PM
with most cable modems, this is fixed simply by completely unplugging the cable modem and then plugging it in while its connected to the airport.
i spent a few minutes rummaging through the pdf's for airport extreme and failed to find documentation on a simple function it SHOULD have. if it doesnt, then i won't buy the one i had been planning for. this is the ability to change/clone its MAC address. this would enable you to 'fake' the address of the computer that was already receiving the IP. can someone confirm whether or not its there?
i spent a few minutes rummaging through the pdf's for airport extreme and failed to find documentation on a simple function it SHOULD have. if it doesnt, then i won't buy the one i had been planning for. this is the ability to change/clone its MAC address. this would enable you to 'fake' the address of the computer that was already receiving the IP. can someone confirm whether or not its there?
more...
macEfan
Dec 8, 08:38 PM
yes! the 30 pin memory from the SE/30 will work!! do you have any idea what size it is??
I will check out shipping probally tomorrow, as i have work to do tonight :)
I will check out shipping probally tomorrow, as i have work to do tonight :)
dscuber9000
May 25, 07:55 PM
Almost five years late, my friend. :D
more...
Maxq333
May 4, 01:47 PM
To answer your question, I just upgraded from JB 4.3.1 to JB 4.3.2 without restoring. Just updated to stock 4.3.2 in iTunes, then ran redsn0w over it to jailbreak, then reinstalled all my JB packages.
Not sure if not going through a full restore will have any adverse affects, I certainly haven't noticed any yet though!
Oh okay, I'm gonna try it now with 4.3.3.
Not sure if not going through a full restore will have any adverse affects, I certainly haven't noticed any yet though!
Oh okay, I'm gonna try it now with 4.3.3.
Agilus
Apr 3, 04:11 PM
What are some good Go clients/servers?
I play Go on occasion. Here's what I've played on/heard of:
Goban - A nice little native Mac program that you can play against GnuGo with, or analyze SDF files with. It might also work with some online servers.
DragonGoServer.net - You can play correspondence games online here, no client required other than a web browser. Some people even play fast games on it. This is what I played on when I played regularly. I haven't been active on there for a year or so, though.
Kiseido Go Server (http://www.gokgs.com/) - I played on here once or twice, but they had a java client back then. Looks like they have a downloadable client on their web page.
Actually, I'll just link you to the Sensei's Library wiki. They have -all- sorts of resources for the Go junkie. http://senseis.xmp.net/ In particular, you can check out their entry on Go Servers: http://senseis.xmp.net/?GoServers
Have fun and good luck! :)
I play Go on occasion. Here's what I've played on/heard of:
Goban - A nice little native Mac program that you can play against GnuGo with, or analyze SDF files with. It might also work with some online servers.
DragonGoServer.net - You can play correspondence games online here, no client required other than a web browser. Some people even play fast games on it. This is what I played on when I played regularly. I haven't been active on there for a year or so, though.
Kiseido Go Server (http://www.gokgs.com/) - I played on here once or twice, but they had a java client back then. Looks like they have a downloadable client on their web page.
Actually, I'll just link you to the Sensei's Library wiki. They have -all- sorts of resources for the Go junkie. http://senseis.xmp.net/ In particular, you can check out their entry on Go Servers: http://senseis.xmp.net/?GoServers
Have fun and good luck! :)
twisted-pixel
Apr 25, 12:31 PM
Ok. Apolgies again but I guess I didn't make myself clear. Yes the pages are written in ASP, I wrote them myself but like any other web page it's still just text at the end of the day. Unlike HTML you can't just view the page source and edit it though since the HTML you are seeing could just be something that is rendered by the server. What I'm after is something that can FTP to my site, download a file and then edit it using a text editor before reuploading
vestigo74
Apr 20, 01:55 PM
Man, I almost wigged out. I just bought the iPad version for $19.99... but this 99 cent thing is only for the iPhone/iPod touch versions.
Whew.
Whew.
OPTiK
Mar 13, 11:43 AM
I could never get pwnage to produce a working ipsw for my iPad 3G... so I took the iBSS & kernelcache (rename to zip and extract) from ..customrestore.ipsw for tetheredboot. make sure your iPad is running the Apple 4.3 and jailbreak using redsnow.. point to 4.2.1 ipsw, it will not boot, when it hangs blackscreen with a white square use tetheredboot and u have cydia... :)
That's pretty sneaky, gonna have to try that out!
That's pretty sneaky, gonna have to try that out!
mrsir2009
Mar 3, 12:28 PM
This made me LOL:
TheWitePony
Jul 25, 08:16 PM
Here is a screen shot. As you can see the Print Center can see my printer, yet it says that I have no drivers insalled. And apparently I nee some drivers because I cannot click add to add the printer. Also, I just downloaded gimp print and it did not seem to work either. I believe that there is some problem with the all in one printers. This is unfortunate, i was planning on using the same printer between my PC and my Mac. I guess I'm going to have to network or move my files to my PC if I ever need to print anything, which is going to be a pain....because I refuse to buy another printer, one should be enough.
simsaladimbamba
Apr 7, 07:43 AM
Perhaps I need to be a tad bit clearer.Uhh
-40% of the time I go into a fresh install of windows,I cannot eject(To install mac drivers
-The option key USED to allow me to eject first before i went into windows
-I'll most probably be unable to go back to mac after installation of windows cuz of the option key being unable to work
Okay. Maybe I am too daft to fully understand you.
Can't you right click on the ODD icon in Windows Explorer?
http://www.ghacks.net/wp-content/uploads/2008/12/mount_iso-500x399.gif
Are both Option keys not working? Have your tried another external USB keyboard? Even a Windows keyboard will work.
And to be absolutely sure, and so I understand correctly, as this is new to me, you were able to eject any optical media inside the ODD by just pressing the OPTION key during the boot process into Windows (after you restarted the Mac and chose to boot Windows)?
If you have successfully installed the Windows drivers from the Mac OS X DVD, then you can use the Boot Camp Utility in the Task Bar to restart into Mac OS X.
-40% of the time I go into a fresh install of windows,I cannot eject(To install mac drivers
-The option key USED to allow me to eject first before i went into windows
-I'll most probably be unable to go back to mac after installation of windows cuz of the option key being unable to work
Okay. Maybe I am too daft to fully understand you.
Can't you right click on the ODD icon in Windows Explorer?
http://www.ghacks.net/wp-content/uploads/2008/12/mount_iso-500x399.gif
Are both Option keys not working? Have your tried another external USB keyboard? Even a Windows keyboard will work.
And to be absolutely sure, and so I understand correctly, as this is new to me, you were able to eject any optical media inside the ODD by just pressing the OPTION key during the boot process into Windows (after you restarted the Mac and chose to boot Windows)?
If you have successfully installed the Windows drivers from the Mac OS X DVD, then you can use the Boot Camp Utility in the Task Bar to restart into Mac OS X.
