iHerzeleid
Jun 25, 11:54 PM
its jsut a 233mhz/64/8gb
TheShinyMac
Apr 22, 09:59 AM
THIS. cross check to isolate the issue to the spaker or amp. it could be that u badly damaged the amp section for that particular speaker out on your receiver. This is rather unusual because most modern receivers have a protection mode that limits wattage in order stop overdriving. but such safeguards can only do so much; if it was being driven for hours, it could have easily been damaged.
The bass part of the speaker works fine, but the little box above it is "broken". I have unscrewed it and it looks like I can take it out and replace it, I will post a picture later today.
The bass part of the speaker works fine, but the little box above it is "broken". I have unscrewed it and it looks like I can take it out and replace it, I will post a picture later today.
zen.state
Apr 18, 08:12 AM
Radeon 9800 Pro or the even better 9800XT.
rhett7660
Jun 27, 01:44 PM
If it hasn't sold and you will entertain the idea of shipping I am interested in it.
Thanks
Thanks
Consultant
Feb 22, 02:16 PM
It's not hacked.
More likely to be due to you using an insecure password.
More likely to be due to you using an insecure password.
mrsir2009
Nov 19, 11:51 PM
If I were you I'd make the whole sig a link. Easier for people to click on it if they can click anywhere in the sig ;)
BlindMellon
May 6, 07:12 AM
Some of the alert sounds that you can use are a little quieter by nature than others. Maybe go through them and see if you can find one that is a little less obtrusive? Hope this helps! :)
looks like that's my main option, thanks,
looks like that's my main option, thanks,
skeep5
Sep 2, 03:21 PM
duh its brand new and we're all beta testers so it will get better
jmann
Nov 28, 10:38 AM
Anything Oprah likes becomes the most sought after item ever. Apple is lucky for this endorsement.
kretzy
Dec 19, 10:00 PM
I like the animation. Why not fill it in one at a time, or have it show up full at the end of the animation? You could even go so far as to fill it up one apple at a time, then disappear one apple at a time?
I'm full of ideas, I just don't know how to do any of this stuff.... :p
I'm actually working on something like that atm. It's so time consuming though...making all the individual frames hehe.
I'm full of ideas, I just don't know how to do any of this stuff.... :p
I'm actually working on something like that atm. It's so time consuming though...making all the individual frames hehe.
skehrberg
Jun 19, 07:03 AM
I will be at the Jordan Creek Apple Store in West Des Moines, IA.
manimalfully
Feb 22, 11:41 AM
This is pretty simple question, can't someone help me out? :(
mdgm
Mar 9, 06:41 AM
Well only the Apple keyboards have the Command key (has Apple symbol on it). However you can use a keyboard designed for Windows. I use Logitech wireless keyboards and mouse. You can get these far cheaper than the Apple products.
I think if needed and not automatically installed by Windows when the Magic Mouse is connected, the drivers for the Magic Mouse would be part of the Boot Camp drivers you need to install.
I think if needed and not automatically installed by Windows when the Magic Mouse is connected, the drivers for the Magic Mouse would be part of the Boot Camp drivers you need to install.
Wailord
Jun 22, 11:06 PM
Not sure but the store might be able to help. Is this the flag ship store?
He could also use Twitter for iPhone to upload pics and use that for updating. Seems the simplest.
He could also use Twitter for iPhone to upload pics and use that for updating. Seems the simplest.
Applejuiced
May 1, 10:50 PM
I know the title's pretty vague, but that's basically my problem. I've been looking around the internet for a fix for it but hasn't seen one so far.
Everything else on it works, just the wifi bar is greyed out and says "No Wi-Fi"
I've tried to reset the network many times, and also tried to reboot it and also resetting the entire iphone. Also, my iPhone isn't jail broken.
Is this a hardware problem?
Also, would it be possible to trade it in. Although it's second hand, so I don't have the original box and receipt etc...
Please help, thank you!
Sounds like the wifi died and yes it would be a hardware issue.
Apple, AT&T or other places that sells iphones dont do trade ins.
If its still under warranty you can find out on the site below by entering the serial number. But an iphone 3G I highly doubt it would still be covered cause its old. You can pay them $200 to replace it but its not worth it IMO. Better off getting a new iphone.
https://selfsolve.apple.com/GetWarranty.do
Everything else on it works, just the wifi bar is greyed out and says "No Wi-Fi"
I've tried to reset the network many times, and also tried to reboot it and also resetting the entire iphone. Also, my iPhone isn't jail broken.
Is this a hardware problem?
Also, would it be possible to trade it in. Although it's second hand, so I don't have the original box and receipt etc...
Please help, thank you!
Sounds like the wifi died and yes it would be a hardware issue.
Apple, AT&T or other places that sells iphones dont do trade ins.
If its still under warranty you can find out on the site below by entering the serial number. But an iphone 3G I highly doubt it would still be covered cause its old. You can pay them $200 to replace it but its not worth it IMO. Better off getting a new iphone.
https://selfsolve.apple.com/GetWarranty.do
Ommid
Apr 23, 04:05 AM
ZDNet Clock (http://www.zdnet.de/apple_systemeigenschaften_zdnet_clock_download-39002345-90565-1.htm) and you got yourself a 3.2GHz 8-core (or faster) for free
wouldn't do it anyway! Haha
wouldn't do it anyway! Haha
applefanatic32
Apr 25, 07:33 PM
Check out this case from Scosche. It's called the KickBack for the iPhone 4. I have several friends that use this case on a daily base and love it. They say that they like the angle at which the phone is propped up and the durability of the case. http://www.gleemobile.com/media/catalog/product/cache/1/image/530x/9df78eab33525d08d6e5fb8d27136e95/0/4/04-1036_34.jpg
TheGenerous
May 6, 01:32 AM
are you asking "how to"?
three
Apr 7, 12:43 AM
Thanks for the replies everyone. I was jailbroken on 4.2.1 and I updated to 4.3 and restored using the jailbroken backup. I will do a clean restore and I will report back.
philipma1957
Apr 25, 02:15 PM
Thanks for the link... you said you buy all your 3TB drives from him but have you installed them in a Mac Pro and do they show the entire hard drive as usable space?
yes if you run snow leopard.
yes if you run snow leopard.
zach
Dec 3, 07:44 PM
�120?! Nah, got it for �2.99 on ebay :rolleyes:
Please do your thread-crapping elsewhere if you're not an interested buyer.
As per description, it's the full retail version.
the education "version" is the full retail version. no need to be snappy.
Please do your thread-crapping elsewhere if you're not an interested buyer.
As per description, it's the full retail version.
the education "version" is the full retail version. no need to be snappy.
thekb
Apr 16, 11:49 AM
First time jailbreaker ...
Following the instructions on the Redmond Pie website for my 3rd gen ipod touch and got to the part where I need to browse for my IPSW.
I DL'd "iPhone3,1_4.3.2_8H7.bundle" and put it in the Contents/Resources/FirmwareBundles/ directory in the Pwnage Tool package.
I DL'd the file "ipod3,1_4.3.2_8H7_Restore.ipsw" and placed on my desktop, but Pwnage Tool keeps giving the "Wrong firmware bundle selected" error.
Not sure where I am going wrong. Any help would be appreciated.
Thanks
Following the instructions on the Redmond Pie website for my 3rd gen ipod touch and got to the part where I need to browse for my IPSW.
I DL'd "iPhone3,1_4.3.2_8H7.bundle" and put it in the Contents/Resources/FirmwareBundles/ directory in the Pwnage Tool package.
I DL'd the file "ipod3,1_4.3.2_8H7_Restore.ipsw" and placed on my desktop, but Pwnage Tool keeps giving the "Wrong firmware bundle selected" error.
Not sure where I am going wrong. Any help would be appreciated.
Thanks
cocacolakid
Apr 23, 03:05 PM
Make sure both Macs are on the same network, then follow these directions....
"http://homepage.mac.com/car1son/os9x_net_n_filesharing.html (scroll to the bottom for OS 8)
On the newer Mac...
In Finder select "Connect to Server..." from the Go menu.
To connect to an OS 8.5 or OS 8.6 system, I enter the string "afp:/at/OS8MacName:*" (Replace MacName with the name of your OS 8.5 Mac)
The OS 8.5 and OS 8.6 systems used AppleTalk-over-Ethernet for their file server, so they don't use the IP address for file sharing services. You need to know the name of the OS 8.6 Mac to connect this way. It's the "Computer Name:" in the OS 8.6 File Sharing control panel.
You should be prompted for a user name and password, as with OS 9 (enter a name and password set up on the OS 8.6 system's File Sharing control panel.)"
"http://homepage.mac.com/car1son/os9x_net_n_filesharing.html (scroll to the bottom for OS 8)
On the newer Mac...
In Finder select "Connect to Server..." from the Go menu.
To connect to an OS 8.5 or OS 8.6 system, I enter the string "afp:/at/OS8MacName:*" (Replace MacName with the name of your OS 8.5 Mac)
The OS 8.5 and OS 8.6 systems used AppleTalk-over-Ethernet for their file server, so they don't use the IP address for file sharing services. You need to know the name of the OS 8.6 Mac to connect this way. It's the "Computer Name:" in the OS 8.6 File Sharing control panel.
You should be prompted for a user name and password, as with OS 9 (enter a name and password set up on the OS 8.6 system's File Sharing control panel.)"
glocke12
May 6, 01:13 PM
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_3_1 like Mac OS X; en-us) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8G4 Safari/6533.18.5)
It's a paintball
huh...no kidding. thats even more bizarre as no goes back there but me..that I know of anyway.
It's a paintball
huh...no kidding. thats even more bizarre as no goes back there but me..that I know of anyway.
